Difference Between Single Phase And Three Phase Meter In Pakistan


We can generally divide to classifying the electrical or power supply system into two types such as Single Phase system and Three Phase System. Both single phase and three phases are quite different from each other. The single phase meters are used in those places where there is less consumption of power supply whereas the three-phase meters are preferable in those places where a large amount of power is required such as factories and industries etc. here below we are going to describe the difference between both single phase and three phase meter in Pakistan. Keep reading this article till the end will surely help you in this regard about Difference Between Single Phase And Three Phase Meter In Pakistan.

Single Phase Meter:

Single phase system is a system in which power flow through a single conductor. Only two wires are required to complete the circuit such as one conductor and one neutral. This single phase system is used in-house for the purpose of carrying less or small power. The single phase meter is able to supply voltage up to 230 v. mostly single phase meter is not able to carry high or maximum power, it is used for less power consumption devices such as Fan, cooler, heater etc. The single phase requires more maintenance than three phase.

Difference Between Single Phase And Three Phase Meter In Pakistan

Three Phase Meter:

In three phase the power flows through three conductors. There are four wires required to compete the circuit such as one neutral and three conductors. Mostly three phase meter is used in factories and industries where heavy loads are maintained. The three-phase supply is continuous and never completely drops to zero but it can also be used as single phase system. For further detail information must read the key differences between Single Phase and Three Phase Meter.

Check out Difference Between Split AC And DC Inverter AC In Pakistan

Difference Between Single Phase And Three Phase Meter In Pakistan

Key Difference between Single Phase and Three Phase Meter:

Following the main points through which we can easily distinguish between both single phase and three phase meter in Pakistan.

Meaning: In single phase meter the power supply through one conductor whereas in three phase system the power supply or flows from three conductors.

Voltage: The single phase meter carries voltage up to 230 Volt whereas the three-phase meter carries voltage up to 415 volts.

Power Capacity: In single phase system less power is transferred it has less power transfer capacity whereas in three phase system high power is transferred due to high power transfer capacity.

Number of Wire: single phase system requires only two wires e-g one conductor and other is neutral, whereas the three-phase system requires four wires one neutral and three conductors.

Use: Single phase is mostly used in-house for small loads whereas the three phases are used in factories and industries for heavy loads.

Efficiency: The efficiency of Single phase is low whereas the efficiency of the three-phase meter is high.

These above aspects are important to share Difference Between Single Phase And Three Phase Meter In Pakistan.

 


Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close

Adblock Detected

Please consider supporting us by disabling your ad blocker